The workshop is at the heart of Velofit Barnet.

Our technical staff are all CYTECH trained and certified and we offer a complete range of service and repair options.

We can do it all! Whether it be a simple repair, an insurance quote, wheel build, puncture repair, hydraulic brake or suspension bleed or fitting of accessories.  No job is too large or too small.  Drop us a line or even better, pop in with your beloved bicycle and we can give you an accurate quote and get you back on the road.

For regular servicing we offer several packaged options.



  • Basic


    The General Service is designed to keep non-hydraulic bikes running smooth. For higher mileage riders and commuters this can be as often as every 6 months. We don’t strip the bike down, but make sure all the moving parts are running true and performing well.

    What’s included:

    • Frame & forks checked for safety and alignment
    • Headset checked for movement, with adjustment if required
    • Bottom Bracket checked for movement with adjustment if required
    • Lubrication of chain, front and rear mechs, cables
    • Check and adjustment of brakes and gears
    • Wheel hubs and rims checked for damage and wear
    • Pump and inspect tyres for wear and tear

    This price is for all our time and labour in sourcing and fitting but does not include the cost of any necessary parts.

  • Advanced


    The mean streets of the Big Smoke are not kind to bikes, and putting a bike through a twice-daily routine of rain, salt, grime and grit takes an extra-heavy toll on the drive train.

    Everything from the General Service is included, plus:

    • Removal and inspection of drive train components – derailleurs, chain, cassette, chain set
    • Each part cleaned and reassembled
    • Drive train refitted and realigned
  • Full Strip


    We’ll take your bike apart right back to the bare frame, then put it back together again, checking components and replacing if necessary.

    What’s included:

    • Bike stripped back to frame, cleaned and checked for alignment and damage
    • Headset removed, cleaned, inspected, rebuilt with new grease, refitted and checked for movement
    • Bottom Bracket removed, cleaned, inspected, then rebuilt with fresh grease, refitted and checked for movement
    • All other parts removed, checked for wear, cleaned and re-lubricated replacing all cables and housings
    • Wheel hubs disassembled, cleaned, checked, then rebuilt with new grease, refitted and checked for movement
    • Brake blocks / disc pads checked and replaced if required
    • Chain cleaned and lubricated, gears set up
    • Tyres checked and pumped

    Not included:

    • The Full Service does not include disassembly and servicing of suspension forks or hydraulic brakes
  • Valet AKA The Clean Up


    If your bike is working but you just want it looking tip top. We will give it a thorough cleaning, including a degrease and relube of the chain.

  • Back on the Road


    Quite often a bike can fall out of use for no good reason.  It worked perfectly well before being incorrectly, cruelly and temporarily laid to rest in a basement, garage or garden shed.  Fear not any retribution.  Bring the bike to us and we can check over all the moving parts, re-inflate the tyres, re-lube the chain and ensure your return to the byways and highways of Barnet will be safe and enjoyable.



We can collect your bike for you from your house.